Security & Surveillance

How Long Should You Keep CCTV Footage? Retention Guide

How long to keep CCTV footage: what regulators say, why no single number fits, and worked storage numbers for 7, 30 and 90 days across 16 cameras.

Ceptory Team7 min read
A retention calendar with the last day of the retention window outlined in coral

TL;DR

There is no universal CCTV retention period. UK and EU guidance says to keep footage no longer than necessary and to justify the period you choose. Many sites start at 30 days and hold incident clips longer; storage cost scales linearly with days.

How long should you keep CCTV footage? There is no single legal answer. The UK government's guidance for people running cameras says you "should not store any information or images for longer than is necessary" and "should delete the information once it is no longer required", and gives no fixed number. So the working answer is: choose the shortest period that still serves your purpose, write down why, and keep only specific incident clips longer. For most sites that lands between a few days and a few months, and the cost of each extra day is easy to calculate. For India, the DPDP Act uses the same purpose-based logic with different rule timing; see our CCTV retention guide for India under DPDP.

Not a universal one. The gov.uk guidance on domestic CCTV is written for home systems, but its retention principle is the same one data protection regulators apply to businesses: "you should not store any information or images for longer than is necessary to protect your property." It also advises that you "regularly delete the recordings and do not keep them for longer than is necessary", and it states no fixed period.

The European Data Protection Board's Guidelines 3/2019 on processing of personal data through video devices (final version, 30 January 2020) are the EU-wide reference for video surveillance. They treat footage of identifiable people as personal data, so storage limitation applies: you decide the period from your purpose and be ready to justify it. Read the guideline itself for the exact wording rather than relying on a summary.

Many articles quote "30 days" as the official period. We could not find that figure in the official guidance above, so treat it as a common starting point, not a rule. Other rules can override it: sector regulations, insurer requirements, contracts, a legal hold during a dispute, or local law outside the UK and EU. Where a regulation sets a period for your industry, that is the figure to follow; ask your counsel or compliance team.

What is a sensible retention period for each type of site?

It depends on how quickly you discover problems. A useful rule: retention should cover the delay between an event and the moment someone notices it, plus time to find and export the footage.

SituationHow fast do you notice?Typical starting point to justify
Staffed shop or lobby, daily reviewSame day or next day7 to 14 days
Warehouse or loading dock, weekly stock checksUp to a week or two14 to 30 days
Unattended site (construction, yard, rural)Often after a weekend or longer30 days
Facilities with periodic claims or auditsWeeks to months30 to 90 days, with a documented reason
Footage tied to an incident, claim or investigationn/aHold the exported clips until the matter closes

These are planning starting points, not legal advice. The point is the reasoning: tie the number to a real detection delay, document it, and review it yearly. A longer period needs a stronger reason, because stored footage of people is something you may have to protect, produce on request and eventually delete.

How much storage does each retention period cost?

Storage grows linearly with days. Our CCTV storage calculator uses the same arithmetic: one megabit per second is 0.45 GB per hour, so a 4 Mbps camera recording around the clock fills about 43 GB a day. Here is a worked example for 16 cameras at 4 Mbps (roughly 1080p H.264) recording continuously.

RetentionRaw storage (H.264)With H.265 (about 40% less)Motion-only, 25% recorded (H.264)
7 daysabout 4.8 TBabout 2.9 TBabout 1.2 TB
14 daysabout 9.7 TBabout 5.8 TBabout 2.4 TB
30 daysabout 20.7 TBabout 12.4 TBabout 5.2 TB
90 daysabout 62.2 TBabout 37.3 TBabout 15.6 TB

The working: 4 Mbps ÷ 8 × 3,600 seconds × 24 hours = 43.2 GB per camera per day; times 16 cameras = 691 GB a day; times the number of days. The H.265 factor and the headroom advice (add 15 to 25% for RAID overhead, decimal terabytes and higher night bitrates) come from the calculator's notes. Real bitrates vary with scene detail, so read the actual figure from your camera or NVR. Our longer walkthrough, how much storage do CCTV cameras need, covers resolution and frame rate, and how much bandwidth CCTV cameras need covers the network side.

Notice the trade: tripling retention from 30 to 90 days triples the disks, the power and the replacement budget, and also triples the volume of personal data you hold. That is why "just keep everything" is rarely a good policy.

Why does retention matter more once footage is searchable?

Because searchable footage is used more, and used for more things. A recorder that nobody can search is mostly an archive you consult after a loss. When you can ask for "a person in a yellow vest at the north gate after 6 pm", the footage becomes an operating tool, and the longer you keep it, the more you can be asked to search. Courts and regulators have started to pay attention to this dynamic: our post on the ALPR warrant case in the Sixth Circuit shows how retention and search scope are part of the legal argument about license plate readers.

Practical consequences:

  • Search cost versus review cost. Manual review of a month of footage is slow; see the video review cost calculator and our post on moving beyond manual video review for the numbers.
  • Access requests. gov.uk notes you "will need to respond appropriately to any subject access requests you receive from the people you record." Short retention means footage may already be deleted, but a request received in time must be handled, so know who does it and how clips are located.
  • Legal holds. If you learn of a claim or investigation, suspend deletion for the relevant cameras and window.

How do you build a CCTV retention policy in six steps?

  1. List your purposes. Theft prevention, safety incidents, access control, insurance claims. Each purpose supports a retention reason.
  2. Measure detection delay. Look at your last twenty incidents and note how many days passed before someone asked for footage. A period that would have missed a fifth of them is too short.
  3. Pick a default period per camera group. Public-facing cameras, back-of-house and perimeter often differ.
  4. Define the exception. Incident footage is exported, labeled with who, why and review date, and stored separately from the rolling buffer.
  5. Automate deletion. Configure the recorder to overwrite or delete on schedule, and test that it does. Manual deletion tends not to happen.
  6. Document and review yearly. One page: purposes, periods, reasons, who can export, how requests are handled. Our incident report template and the guide to writing an incident report from video footage show what to record for exported clips.

Where does video indexing help with retention?

It lets you keep less raw footage and still find what you need. If a clip can be found in seconds by describing it, you do not need a long rolling buffer just so someone has time to scrub through it. Ceptory is a video intelligence platform: you upload recorded clips or add them by URL through the API, and search scenes, speech and on-screen text in natural language. That supports the workflow of exporting the relevant windows from your recorder, indexing them, and deleting the rest on schedule. Two caveats: Ceptory does not connect to live camera streams or replace your recorder, so the rolling buffer still lives in your NVR or VMS; and indexed footage you upload is itself data you must retain and delete under your policy. Indexing costs $0.042 per minute indexed plus $0.0015 per minute of infrastructure, with search at $4 per 1,000 queries (see pricing), so index the windows that matter, not every camera around the clock. For how we think about the boundary between recorders and search, read video intelligence platforms vs traditional VMS, and for searching exported clips, how to search CCTV footage for a person, vehicle or event.

What should you do this week?

  1. Find out what your recorders are set to keep today, per camera. Many are on defaults nobody chose.
  2. Use the CCTV storage calculator with your real bitrates to see the cost of your current period and one shorter, one longer.
  3. Write the one-page retention policy from the six steps above and get it approved by whoever owns privacy or legal.
  4. Check whether your sector, insurer or local law sets a specific period, and record the source.
  5. Test the deletion: confirm that footage older than your period is actually gone.

The short version

Keep CCTV footage as long as you can justify and no longer. Start from the time it takes you to notice problems, check sector and local rules, price the storage with real numbers, and keep incident clips separately. If you want to find moments in what you keep without long scrubbing sessions, see Ceptory and the government and security solution.

Frequently asked questions

How long should CCTV footage be kept?

No single period applies everywhere. Regulators say footage should be kept no longer than necessary for its purpose, so pick a period you can justify, write it down, and hold longer only for clips tied to an incident.

Is 30 days the legal CCTV retention period?

No. Thirty days is a common practice, not a rule in the UK guidance we checked. Local law, insurance, your sector and your purpose can all point to a shorter or longer figure.

How much storage do 16 cameras need for 30 days?

At 4 Mbps H.264, recording continuously, 16 cameras use about 43 GB each per day, roughly 20.7 TB for 30 days. H.265 at about 40 percent less brings that near 12.4 TB.

Can I keep footage longer if there is an incident?

Generally yes. Export the clips that matter, record why they are held and for how long, and let the rest of the footage expire on the normal schedule.

Do people have a right to see footage of themselves?

In the UK, gov.uk says you must respond appropriately to subject access requests from people you record. Short retention can mean footage is gone before a request arrives, so have a process.

Ceptory

Search your own footage in plain language. The free tier indexes 60 minutes of video.