Security

AI Loitering Detection for Security Cameras

Set how long is too long, draw the area, and Ceptory alerts you when someone stays there beyond it: at store entrances, ATMs, car parks and back doors. With a recording, ask who hung around, for how long and what they did.

Attach a clip and send. The task is filled in; change it to anything you need.

Example footage: visitors at a reception desk, a sample camera in the dashboard.

Time limit

1 min to 24 h

5 minutes by default.

Live check

Every 10 s

Tracks how long each person stays.

Alert to

Phone, Slack, Teams

With the frame and a clip.

How it works

Check a clip in minutes, or watch cameras around the clock

Upload a clip

For footage you already have: an incident, a shift, a day on site.

  1. 01Attach a recording (MP4, MOV and most video formats, up to 2 GB) in the box at the top of this page or in a new dashboard chat.
  2. 02Send the prompt as it is, or change it: “Who stayed longest in view in this clip, and for how long?”
  3. 03Get the answer with timestamps and frames, ask follow-ups, and export a report to PDF or Word.

Alert when someone stays too long

Choose the time limit and draw the area; Ceptory tracks how long each person stays.

  1. 01Open Cameras and choose Connect a camera. Loitering is already picked when you come from this page.
  2. 02Choose the source: a webcam on this computer, an IP camera or NVR (RTSP or ONVIF, through Ceptory Edge or the desktop app), a live stream pushed from OBS, a drone or an encoder, or one of our example videos.
  3. 03Draw the area to watch: the area to watch, such as a store entrance, an ATM lobby, a car park or a back door.
  4. 04Set the rules: how long someone may stay before an alert (5 minutes by default, from 1 minute up to a day).
  5. 05Choose where alerts go and how long a clip to keep, then save. The camera starts watching straight away.

What it finds

What Loitering Detection picks up

People staying too long

Anyone in the area beyond your time limit, from a minute at an ATM to an hour in a car park.

Casing behaviour

In recorded footage, ask who kept watching a door, checking cars or pacing an area.

Repeat visits

Ask a recording whether the same person came back several times.

Where and how long

Every alert says how long the person had been there.

Rules you control

Set it up for your site

Time limit
How long someone may stay before an alert: 5 minutes by default, 1 minute to 24 hours.
Zone
Draw the area; seating and queues where waiting is normal can be left out.
Check rate
A frame every 10 seconds by default.

Every alert

What each alert includes

  • The frame that triggered it, with the person, object or vehicle boxed
  • A 10, 20 or 30 second clip around the moment (half before, half after), if you turn clips on
  • Camera name, site, time and the rule that fired
  • Delivery to Slack, Microsoft Teams, Discord, email or a signed webhook, plus push to the Ceptory phone app and an optional alarm on the monitoring desk
  • One click to turn the alert into a full incident report you can export to PDF or Word

Use cases

Where teams use it

Retail entrances

People hanging around doors and stockroom entrances before a theft.

Banks and ATMs

Someone lingering in an ATM lobby or outside a branch after hours.

Car parks

People walking between cars or waiting by vehicles for a long time.

Schools and campuses

Strangers waiting near gates and entrances.

Compared

Doing it by hand vs. with Ceptory

Without Ceptory

  • Guards notice loitering only if they happen to be watching that screen
  • Suspicious visits found after the incident
  • No record of how long someone stayed

With Ceptory

  • Every camera timed continuously
  • An alert while the person is still there
  • Each alert records how long they stayed

Good results

Tips for accurate results

  • Leave benches, bus stops and queues out of the zone.
  • Pick a time limit that fits the place: a minute at an ATM, longer in a car park.
  • Pair with intrusion detection after hours.

Cameras

Works with the cameras you have

Any IP camera or NVR with RTSP or ONVIF, a webcam, or a live stream from OBS, a drone or an encoder. Ceptory Edge runs on a mini PC, NAS or Raspberry Pi on the camera network; nothing is opened to the internet.

FAQ

Loitering Detection: common questions

What is loitering detection?

Loitering detection alerts when a person stays inside an area for longer than a set time. In Ceptory you draw the area on a camera and choose the limit, from 1 minute to 24 hours.

Will people waiting in a queue trigger it?

Only if they're inside the zone. Draw the zone to leave out queues, seating and bus stops where waiting is normal.

Can I check a recording for loitering?

Yes. Upload the clip and ask who stayed in an area for more than a few minutes; Ceptory lists each person with arrival and departure times.

Which cameras does it work with?

Any IP camera or NVR with RTSP or ONVIF, a webcam, or a live stream pushed from an encoder.

Get started

Start loitering detection today

Free to start. Upload a clip or run it on our example footage before you connect a single camera.

A dark video management wall of 9 camera feeds, with a coral line-crossing rule on one camera.