Vehicles & traffic

Two-Wheeler Helmet Detection and Triple Riding Alerts

Ceptory spots motorcycle and scooter riders without a helmet, and bikes carrying three or more people, on the cameras at your gates and roads. Upload a clip to list every violation with its timestamp.

Attach a clip and send. The task is filled in; change it to anything you need.

Example footage: a scooter rider without a helmet in a covered car park, a sample camera in the dashboard.

Detects

No helmet, triple riding

Riders and passengers.

Live check

Every 4 s

Only when something moves.

Re-alert wait

2 min default

Per camera.

How it works

Check a clip in minutes, or watch cameras around the clock

Upload a clip

For footage you already have: an incident, a shift, a day on site.

  1. 01Attach a recording (MP4, MOV and most video formats, up to 2 GB) in the box at the top of this page or in a new dashboard chat.
  2. 02Send the prompt as it is, or change it: “Which riders aren't wearing a helmet? Give timestamps.”
  3. 03Get the answer with timestamps and frames, ask follow-ups, and export a report to PDF or Word.

Watch gates and roads for helmet violations

Draw the road area; Ceptory checks riders every 4 seconds when there's movement.

  1. 01Open Cameras and choose Connect a camera. Rider helmets is already picked when you come from this page.
  2. 02Choose the source: a webcam on this computer, an IP camera or NVR (RTSP or ONVIF, through Ceptory Edge or the desktop app), a live stream pushed from OBS, a drone or an encoder, or one of our example videos.
  3. 03Draw the area to watch: the road area, such as a factory gate, a campus entrance, a society driveway or a junction.
  4. 04Set the rules: whether to also alert on triple riding (three or more people on one two-wheeler) and how long to wait before alerting again.
  5. 05Choose where alerts go and how long a clip to keep, then save. The camera starts watching straight away.

What it finds

What Rider Helmet Detection picks up

Riders without a helmet

Motorcycle and scooter riders with no helmet on.

Passengers without a helmet

Pillion riders without a helmet, where your rules require one.

Triple riding

Three or more people on one two-wheeler.

On recordings

Every violation in a clip, with its timestamp.

Rules you control

Set it up for your site

Triple riding
Also alert on three or more people on one two-wheeler (on by default).
Road zone
Draw the lane or gate area to check.
Re-alert wait
2 minutes by default between alerts from the same camera.

Every alert

What each alert includes

  • The frame that triggered it, with the person, object or vehicle boxed
  • A 10, 20 or 30 second clip around the moment (half before, half after), if you turn clips on
  • Camera name, site, time and the rule that fired
  • Delivery to Slack, Microsoft Teams, Discord, email or a signed webhook, plus push to the Ceptory phone app and an optional alarm on the monitoring desk
  • One click to turn the alert into a full incident report you can export to PDF or Word

Use cases

Where teams use it

Factory and plant gates

Staff riding in without helmets, a common safety rule at industrial sites.

Campuses and universities

Helmet rules at entrances and internal roads.

Housing societies

Residents and delivery riders at the gate.

Traffic monitoring

Helmet and triple-riding violations at junctions.

Compared

Doing it by hand vs. with Ceptory

Without Ceptory

  • Guards stop riders at the gate when they notice
  • Violations not recorded
  • Traffic cameras reviewed by hand

With Ceptory

  • Every rider checked as they pass
  • Each violation saved with its frame
  • Ask a recording for all violations at once

Good results

Tips for accurate results

  • Aim the camera along the lane so riders are seen from the front or side, not straight down.
  • Draw the zone over the lane only, not parked bikes.

Cameras

Works with the cameras you have

Any IP camera or NVR with RTSP or ONVIF, a webcam, or a live stream from OBS, a drone or an encoder. Ceptory Edge runs on a mini PC, NAS or Raspberry Pi on the camera network; nothing is opened to the internet.

FAQ

Rider Helmet Detection: common questions

Is this the same as hard hat detection?

No. Rider helmet detection is for people on motorcycles and scooters. For hard hats and safety helmets on construction and industrial sites, use PPE detection.

Can it detect triple riding?

Yes. With triple riding on (the default), Ceptory also alerts when a two-wheeler carries three or more people.

Can I check traffic footage I already have?

Yes. Upload the clip and ask for every rider without a helmet and every triple-riding bike, with timestamps.

Does it read the plate of the violating bike?

Helmet detection flags the rider and saves the frame. To read plates, add a plate recognition camera aimed at the lane.

Get started

Start rider helmet detection today

Free to start. Upload a clip or run it on our example footage before you connect a single camera.

A vehicle and traffic concept: an intersection map with one vehicle bracketed.